Danish Heat Supply Act

Unofficial translation from Danish

Consolidated Act No. 772 of 24 July 2000

THE HEAT SUPPLY ACT

Hereby announces the Heat Supply Act No. 382 of 13 June 1990 with amendments according to Article 1 in Act No. 96 of 9 February 1994, Article 1 No. 1, in Act No. 213 of 29 March 1995, Article 1 no. 2 in Act No. 436 of 10 June 1997 and Article 1 in Act No. 451 of 31 May 2000

Danish_Heat_Law_2000EN[1]

CHAPTER 1

Objectives and Definition

Article 1. The objective of this Act is to promote the most socio-economic and environmentally friendly utilization of energy for heating buildings, supplying them with hot water and reduce the dependency of the energy system on oil.

(2) in agreement with the objectives mentioned in subsection (1), the supply of heat shall be organised with a view to promoting the highest possible degree of cogeneration of heat and power.

Article 2. For the purpose of this Act, collective heat-supply plant means any undertaking that operates the below-mentioned plants with the object of supplying energy for heating buildings and supplying them with hot water:

1) plants producing and transmitting other inflammable gasses than natural gas;

2) plants for transmitting heated water or steam from combined heat and power plants, waste incineration plants, industrial enterprises, geothermal installations, etc.;

3) district heating supply plants, solar heating plants, waste-incineration plants, etc. , including combined heat and power plants with an electric effect not greater than 25 MW;

4) block heating stations with heat generating capacity exceeding 0.25 MW, including combined heat and power plants with an electricity output not greater than 25 MW.

(2) In article 2 and 3 of the Act, collective heat plants also include distribution networks for natural gas.

(3) Excepting combined heat and power plants with an electricity effect not greater than 25 MW, the collective heat supply plants referred to in subsection (1) do not include undertakings regulated by the Act on the Exploitation of the Danish Underground or the Act on Electricity Supply.

(4) The Minister for Environment and Energy may provide regulations that the Act, wholly or in part, shall not apply to certain kinds of collective heat supply systems.

When the lights go out: a guide to power cuts

By Lindsey

One minute you’re happily watching TV, the next you’re sat in the dark, wondering what went wrong. Sounds like a power cut. They’re not great, but they’re not the end of the world. We’ve created a helpful guide to help you get through a power cut – who to call, what to do, that sort of thing.

Read on and find out what you should do the next time the lights go out unexpectedly.

Why has this happened?

Power cuts can happen for a few different reasons:

  • The weather. It’s the root of so many problems – soggy barbeques included – and power cuts are no different. Strong winds can damage power lines, rain can get to underground cables and lightning can strike important equipment.
  • Trees. We love them, but they can cause havoc if they grow near power lines. The lovely folk at the UK Power Network work hard to cut trees back, but damage can still be done. Especially in – see above – bad weather.
  • Other people. Construction workers can accidentally cause power cuts by damaging cables.

Are you a prepayment customer?

If you are, it’s worth checking your meter – it might have run out of credit. If the meter display shows an amount, followed by ‘DEBT’, you need to charge your key with the minimum amount at your local outlet.

If the lights go out, you should check your fuse box. If the trip switch is in the ‘off’ position or the fuses have blown – you’ve found what’s caused your problem.

If your trip switch keeps returning to the ‘off’ position, one of your appliances might be playing up. Try switching them all off, and turning them back on one by one.

If that doesn’t work, you should call an electrician – don’t try and fix it yourself. We don’t want any nasty accidents.

If your fuse box looks fine then it’s time to report a power cut. You’ll need to give your local network distributor a call.

We’ve got a handy list you can check to find out which distributor that is, and how to get hold of them.

Are your neighbours’ lights still on? Lucky them. Here’s why.

The electricity network is built in a way that means different houses – even if they’re on the same street – can get their power from different cables.

So if a cable is damaged, it won’t necessarily mean everyone is affected.

While it’s dark

Here are a few things to do during a power cut:

  • Keep your food cold. Avoid opening your fridge and freezer if you can. Food can last up to 15 hours if you keep the door shut
  • Your landline might not work. Keep a mobile handy and try not to use up the battery – you might need it
  • Leave one light switched on so you’ll know when your power comes back
  • Check up on any vulnerable neighbours to make sure they’re ok

Be prepared

As every Scout knows, it’s good to be prepared. The next time a power cut strikes, you’ll be ready.

  • Save the important contact details. Grab a post-it note, write the number of your network distributor on it and stick it near your fuse box.
  • Keep a torch and batteries handy, and save your phone battery in case you need to make a call.
  • Unplug sensitive appliances such as TVs and computers. When the power returns, turn them back on one at a time.

You can find all the info you need about power cuts on our website.

Source:: When the lights go out: a guide to power cuts

You and your Gas Meter Safety Inspection

By Lindsey

Make sure your gas meter is happy and healthy

Gas Meter Safety Inspections are important because your gas meter’s important. Even if you send us regular meter readings, we need to make sure your meter is working properly – if it’s old or damaged, it could be dangerous.

That’s why you should make sure your gas meter gets a Gas Meter Safety Inspection every two years.

Your meter is the point at which gas enters your home. A Gas Meter Safety Inspection checks that it’s in good condition and safe to use.

What happens at a Gas Meter Safety Inspection?

It’s very quick and easy – you don’t have to do a thing. An experienced inspector will examine your meter. They’ll look carefully at the emergency control valve and at all the points where gas enters and leaves. They’ll make sure the meter is in good order and that no gas is able to escape.

Ofgem, the energy industry regulator, requires us to do this check every two years. It’s a legal requirement. It makes sense and it keeps you safe.

Arranging a Gas Meter Safety Inspection

We’ll send you a letter to let you know that your meter is due for an inspection. Just call 0800 980 9058 (8am to 6pm Monday to Friday and 8am to 2pm on Saturdays) to book your appointment.

We’ll arrange a timeslot that’s best for you, and the inspection itself doesn’t take very long.

If you don’t receive a letter from us, there’s nothing you need to do.

What happens if you don’t arrange your Gas Meter Safety Inspection?

If we’re not able to contact you to set up your appointment – we’ll send you reminder letters – we may have to apply for a warrant to gain access to your meter. It really is that important for your safety.

So keep an eye out for a letter that asks you to arrange your Gas Meter Safety Inspection and give us a call as soon as you hear from us. Together, we’ll keep your gas meter happy, healthy and safe.

Source:: You and your Gas Meter Safety Inspection